Power 595: Overview
Product characteristics | |
---|---|
Processor cores | 8- to 64-core POWER6 4.2 or 5.0 GHz via 8-core processor books |
L2 cache | 4 MB per core |
L3 cache | 32 MB per chip |
RAM (memory) | 16 to 32 DIMMs per processor book Up to 4 TB of 400 MHz DDR2 or Up to 1 TB of 533 MHz DDR2 |
PCIe I/O drawers | 24": 1 - 32 |
Internal disk bays | 26 SAS Small Form Factor bays in each 24" PCIe I/O drawer Up to 832 maximum per system |
Adapter slots | 20 PCIe in each 24" I/O drawer 640 maximum per system |
I/O ports | 4 GX adapter ports per processor book, 32 per system |
Hardware Management Console ports | Two pairs via redundant Ethernet hubs |
POWER Hypervisor | LPAR, Dynamic LPAR, Virtual LAN |
PowerVM Standard Edition (optional) | Micro-Partitioning with up to 10 micro-partitions per processor (254 maximum); Multiple Shared Processor Pools; Virtual I/O Server; Shared Dedicated Capacity; PowerVM Lx86 |
PowerVM Enterprise Edition1 (optional) | PowerVM Standard Edition plus Live Partition Mobility and Active Memory Sharing |
Capacity on Demand (CoD) configurations | 8 to 64 processor cores in increments of one (via one to eight processor books); 4.2 or 5.0 GHz POWER6 processor cores |
RAS features | Processor Instruction Retry Alternate Processor Recovery Selective dynamic firmware updates IBM Chipkill ECC, bit-steering memory ECC L2 cache, L3 cache Redundant service processors with automatic failover Redundant system clocks with dynamic failover Hot-swappable disk bays Hot-plug/blind-swap PCI slots Hot-add I/O drawers Hot-plug power supplies and cooling fans Dynamic Processor Deallocation Dynamic deallocation of logical partitions and PCI bus slots Extended error handling on PCI slots Redundant power supplies and cooling fans Battery backup and redundant battery backup (optional) |
Capacity on Demand features (optional) | Processor CUoD (in increments of one processor), Memory CUoD (in increments of 1 GB), Reserve CoD, On/Off Processor CoD, On/Off Memory CoD, Trial CoD, Utility CoD |
Operating systems | AIX V5.3 or later IBM i 5.4 or later SUSE Linux Enterprise Server 10 for POWER (SLES10 SP2) or later; Red Hat Enterprise Linux 4.7 for POWER (RHEL 4.7) or later RHEL 5.2 or later |
High availability | PowerHA family |
Power requirements | 200v to 240v; 380v to 415v; 480v AC |
System dimensions | One frame (slimline doors): 79.3"H x 30.5"W x 58.5"D (201.4 cm x 77.5 cm x 148.6 cm); weight: 3,376 lb (1,531 kg)2;One frame (acoustic doors): 79.3"H x 30.5"W x 71.1"D (201.4 cm x 77.5 cm x 180.6 cm); weight: 3,422 lb (1,552 kg)2 |
Warranty (limited) | 24x7, same day response for one year; on-site (varies by country). Warranty service upgrades and maintenance are available. |
1 Not supported on IBM i 5.4, 6.1.
2 Weight will vary when disks, adapters, additional frames and other peripherals are installed.